Inside Pictures

Here is a update with pictures from the inside of the car. 

When we get the new charger we are going to make a video of the car when we drive it around. 

We want to show the top speed, acceleration and sound levels. 

Front seat

Backseat and Battery box

From the back

Engine compartment

Done with the Almost Everything

So for the last 2 weeks me and Simon have been working hard on finishing the car for Paf carnival. 

This is how it looked when we got it back from the painters. 

 We started with painting the inside.

Here we see me painting the roof. 

The roof and the sides was painted with a white that contains a little blue in it so it will match the blue seats.

The yellow and black that still is visible will be covered by carpet and side panels. 

 Michael our contact person on Paf came and helped us with the car.

Michael painting the floor black.

 We also got help from Paf with putting in the carpet.

Ulf putting in the carpet and me and Simon preparing the controller.

 Our seats and side panels arrived and we were very impressed by how sweet they looked. They are refurbished with used jeans from Paf employers and the driving seat is made from mine and Simon's old jeans.

Test sitting the refurbished seats.

 Because the doors and back hatch was still in painting we continued to work with the details.

Here we can see the carpet is in place and a few of the side panels installed.

 We mounted the motor and controller.

Simon is happy.

 Two days before deadline we got the doors and the back hatch back from the painters.

Here we can see the doors inside and behind the car. 

 While we prepared to put in the doors we tested the inside lighting.

Ledstripes that you can change color with your phone. 

After a little more work the car was in good enough condition to be shown to the public. We still need to do some wiring and install a few electrical components to be able get the car moving on its own. But that we will work on after the Paf carnival, because they are only going to use it as a stationary bar and is not in need of moving.  

The car is ready for transport.

 The inside become awesome with the jeans seats.

Under the seat you can see the battery box. 

Here we go.

 We stopped by Paf so the employers could see the car before we took it to town were the carnival was being held.

Many questions and a lot of touching.

While the car is at the carnival Simon and I are going to take some holiday.
See you later.

Preparing for the Paint and Building the Box for the Batteries

I am not updating so often anymore because we are working so much on the car and much of the work now is kinda boring. But as soon we get it back from the paint job I will start posting regularly again.

I have worked on preparing the car for the paint and Simon started to build the battery box.
We will paint the inside our self and much of the sides will be covered with panels.     

Rear left side before the paint. 

Rear right side after a little paint.

We also tested the motor and transmission assembly to see if there was any weird noise or vibration. Now it is ready to be put in the car.

Controller, motor, transmission and cables.

 Simon started to work on the battery box that is going to be under on of the seats.

Sturdy metal frame to hold over 300 kg of batteries

Now I will end this week with doing some paperwork and getting some rest.

Batteries, Blasting and a Tesla

We have been very busy the last weeks. A lot of school work and a couple of major events happening to the car.
First we got our batteries, they are 30Ah, 12V and all together they weighs over 1.2 tons. 

120 UPS batteries ready to be tested.  

The batteries is from PAF´s UPS system that were scheduled to be exchange for new ones. We are not going to use all 120 of them. So after a load test we picked out 32 of the best batteries. The plan is to use 32 or 40 batteries depending on how much the car starts to weigh. The rest is going to be a backup.

Next big thing was that we got the car soda blasted.  

Ready for transport.

When we got the car back it was filled with soda. So the first job was to clean it and start preparing it for the painting

Nice and shiny.

At the front we noticed a lot of small surface rust rings, this is probably from stone shots.

A little paint and this should start looking sweet.

At an event here on Åland the company Tesla Motors brought 2 Tesla Model S for the public to take a closer look on. You could also take one of them out for a test ride.  

Here is Simon doing some industrial espionage again.

The next week we are going to prepare the car for the painting and we are also going to do the final mounting of the motor.